极性基湿润剂与矿岩类粉尘颗粒的作用机理

根据矿岩类粉尘微颗粒的表面性质和极性基湿润剂的特性，应用分子热力学和表面物理化学理论探讨了湿润型抑尘剂与矿岩类粉尘之间的相互作用机理。矿岩类粉尘吸附水的本质是由于它们之间的相互吸引作用，是分子之间的短程相互作用力和长程作用力共同作用的结果。当矿岩类粉尘与水相碰撞时，只有当吸引力大于排斥力时，水分子才能牯附于矿岩类粉尘，表面张力和体系自由能足够小时，水才能湿润矿岩类粉尘。分析了湿润剂对水和矿岩类粉尘的表面改性的原理，它增加水和矿岩类粉尘之间的相互作用力，减小了界面表面张力和体系自由能，使矿岩粉尘被水湿润能自由地进行。     

Discriminate Analysis for Dust Storm Prediction in the Gobi and Steppe Regions in Mongolia

A discriminate analysis method for probability forecast of dust storms in Mongolia has been developed. The prediction method uses data recorded at 23 meteorological stations in the Gobi and steppe regions of Mongolia, including surface air pressure and geo-potential height at the 500-hPa level on grid points, and weather maps from 1975 to 1990. Weather elements such as air temperature, pressure, geo-potential height etc, which influence the formation of dust storms, are prepared as predictors. To select the most informative/important predictors (variables), we used a mean correlation matrix of variables together with the Mahalonobis distance, and correlation coefficients between dust storms and predictors with an orthogonalization for removing correlated predictors. The most informative predictors for dust storm prediction are intensities of surface cyclones and migratory anticyclones, passage of cold fronts, the horizontal gradients of the surface air pressure in the cold frontal zone, cyclonic circulations from the ground surface up to the 500-hPa level, the geo-potential height at 500-hPa level and its temporal changes. Selected predictors are used in discriminate analysis for formulating dust storm prediction equations. Sandstorm data have been classified into three classes, viz., strong, moderate and weak dust storms, depending on their intensities, durations and areas covered. Predictions of the probabilities of dust storm occurrence use the prediction equations for each class. The prediction is made from 12 hours to 36 hours. Verification of the probability forecasts of dust storms is also shown. The accuracy of forecasts is 72.2–79.9% with the data used for developing equations (dependent variables), in contrast to 67.1–72.0% with unrelated data for deriving equations (independent variables).     

Analysis of Roadside Inhalable Particulate Matter (PM10) in Major Korean Cities

A data analysis of three major Korean cities was conducted to assess roadside inhalable particulate matter 10 μm or smaller in aerodynamic diameter (PM₁₀), including temporal and meteorological variations, over a recent period of 4 to 6 years. The yearly roadside PM₁₀ concentrations presented a well-defined increasing trend or no trend depending on the roadside monitoring station. Most mean values exceeded or approximated the Korean standard of 70 μg/m³ per year for PM₁₀. A representative roadside diurnal trend was characterized by a distinct morning maximum. In most cases, the Sunday roadside concentrations were similar to or somewhat lower than the weekday concentrations, and the PM₁₀ concentrations presented a well-defined seasonal variation, with the maximum concentration in March. The monthly maximum concentrations observed in March were most likely attributable to Asian dust storms. In two metropolitan cities (Seoul and Busan), the frequency of days with roadside PM₁₀ concentrations exceeding the standard of 150μg/m³ per 24 h was much lower for the roadside monitoring stations than for the residential monitoring station, whereas in the third city (Daegu), this result was reversed. Interestingly, the average maximum concentrations observed for the roadside sites in Seoul and Busan during March were higher than those for the residential sites, suggesting that the roadside concentrations responded more to the dust storms than the residential areas. The relationship between the pollutant concentrations and five important meteorological parameters (solar radiation, wind speed, air temperature, relative humidity, and precipitation) showed that the number and type of meteorological variables included in the equations varied according to the monitoring station or season. Finally, the current results confirmed that attention should be given to the PM₁₀ exposure of residents living near roadways.     

Effects of particle thermal characteristics on flame microstructures during dust explosions of three long-chain monobasic alcohols in a half-closed chamber

To reveal clearly the effects of particle thermal characteristics on flame microstructures during organic dust explosions, three long-chain monobasic alcohols, solid at room temperature and similar in physical-chemical properties, were chosen to conduct experiments in a half-closed chamber. In the experiments, the dust materials were dispersed into the chamber by air to form dust clouds and the hybrids were ignited by an electrical spark. A high-speed optical schlieren system was used to record the flame propagation behaviors. A fine thermocouple and an ion current probe were respectively used to measure the flame temperature profile and the reaction behaviors of the combustion zone. Based on the experimental results, combustion behaviors and flame microstructures in dust clouds with different thermal characteristics were analyzed in detail. As a result, it was found that the dust flame surfaces were completely covered by cellular structures that significantly increased the flame frontal areas. Flame propagated more quickly and the number of the cellular cells increased as increasing the volatility of the particles. On the contrary, maximum temperature and the thickness of the preheated zone decreased as increasing the volatility of the particles. According to the ion current profile, the particles in the preheat zone were pyrolyzed to intermediate radicals and the radicals' fraction in the higher volatile dust flame was higher than that in the lower volatile dust flame.     

环境磁学在城市地表灰尘重金属污染研究中的应用

随着环境问题日渐突出,地表灰尘重金属污染日益成为研究热点。单纯采用化学方法监测重金属污染具有一定局限性,环境磁学方法以其简便、快捷、经济且无害化的特点在城市重金属污染研究中广为应用。通过文献调研,综述环境磁学在城市地表灰尘重金属污染研究中的应用与研究进展,阐明重金属的主要来源,简述环境磁学的诸多参数,分析磁学参数与重金属的关系,并通过对比不同的磁学分析方法,探讨环境磁学方法在城市地表灰尘重金属污染研究中存在的问题及其发展趋势。     

大型碳化硅生产园区面源源强及减排指标核算

以某年产25万吨大型碳化硅园区无组织排放面源为例,提出基于多个地面站气象数据的CALPUFF模型地面浓度反推方法,优化流场模拟,使得无组织面源源强核算结果更加准确,并以环境保护目标空气质量达标为原则,核算其大气污染物减排指标,得出具体结论:园区大气污染物SO2、NOX、CO、PM10年排放量分别为449.06t、86.98t、5158.58t、115.06t;无组织排放SO2、CO及PM10的减排比例分别为63.5%、19.2%、42.44%,对应减排量分别为285.16 t/a、990.45 t/a、48.83 t/a。     

Study of the influence of melamine polyphosphate and aluminum hydroxide on the flame propagation and explosion overpressure of aluminum magnesium alloy dust

When aluminum magnesium alloy dust floats in the air, a certain ignition energy can easily cause an accidental explosion. To prevent and control the occurrence of accidental explosions and reduce the severity of accidents, it is necessary to carry out research on the explosion suppression of aluminum magnesium alloy dust. This paper uses a vertical glass tube experimental device and a 20 L spherical explosive experimental device to carry out experimental studies on the suppression of the flame propagation and explosion overpressure of aluminum magnesium alloy dust with melamine polyphosphate (MPP) and Al(OH)₃. With increasing MPP and Al(OH)₃ concentrations, the flame brightness darkened, the flame velocity and propagation distance gradually decreased, and P_max and (dp/dt)_max decreased significantly. When the amount of MPP added reached 60%, the flame propagation distance decreased to 188 mm, which is a decrease of 68%, and the explosion overpressure decreased to 0.014 MPa, effectively suppressing the explosion of aluminum magnesium alloy dust. The experimental results showed that MPP was more effective than Al(OH)₃ in inhibiting the flame propagation and explosion overpressure of the aluminum magnesium alloy dust. Finally, the inhibitory mechanisms of the MPP and Al(OH)₃ were further investigated. The MPP and Al(OH)₃ endothermic decomposition produced an inert gas, diluted the oxygen concentration and trapped active radicals to terminate the combustion chain reaction.     

TSLCDM长袋低压脉冲布袋除尘器及其应用

为了使电炉烟气治理过程中污染源的排放达到国家排放标准,提出一种TSLCDM长袋低压脉冲除尘器(简称TSLCDM除尘器)。通过对该除尘器结构、除尘原理以及不同工况下除尘效率和过滤阻力的分析,得到该除尘器的除尘效率>99.9%,压力损失<1200 Pa,最终排出的烟气含尘质量浓度约5.54 mg/m3,满足了国家的超低排放要求,以泉州某公司电炉项目除尘系统为研究对象,证明了该新型脉冲布袋除尘器在电炉烟气治理除尘系统的应用效果,具有很好的经济和环境效益。     

焦化厂环境粉尘中多环芳烃污染危害分析

分别采集某焦化厂办公区、新厂地面站、炼焦一车问、焦炉炉顶、老厂地面站环境中的粉尘样品，通过超声波萃取和高效液相的方法，测定了总悬浮颗粒物（TSP）、可吸入颗粒物（PM10）、苯并[a]芘（BaP）以及美国EPA优控的14种PAHs的浓度，并对照我国环境空气质量标准（GB3095—1996），分析了焦化厂环境粉尘中多环芳烃的污染状况。由分析可知，焦化厂环境中总悬浮颗粒物TSP的浓度（除了老厂地面站）、可吸入颗粒物PM10的浓度、苯并[a]芘的浓度均超过国家环境空气质量标准规定的限值。通过计算粉尘中多种PAHs相对于苯并[a]芘的等效浓度可知，粉尘中多种PAHs的共同作用，大大提高了粉尘的毒性。     

非煤企业粉尘控制措施现状调查研究

采用典型抽样的方法选取5个非煤企业，对5个非煤企业的508例粉尘作业人员进行流行病学问卷调查，对20例工程技术人员及粉尘监测人员进行个人深入访谈。粉尘作业人员对粉尘危害预防的了解情况的正答率为84．62％，其中听过企业讲授粉尘危害及预防知识的比例为79．35％，知道工作环境中有人检测粉尘浓度的比例为77．42％。结论是非煤企业对生产性粉尘危害及预防知识的宣传力度不够；个人防护用品使用率低；粉尘作业人员对粉尘危害及基本防尘措施有一定程度的认识，但对国家相关法规认识程度较低；粉尘浓度监测可能存在漏洞。